Burner Systems Equipment For Energy Management
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UFGTP range of systems are a Turnkey solution offered by Uniflare to the gas handling and process. This includes all the equipment and pipework required to connect from an AD Plant or Wastewater Treatment Plant digester outlet through to the CHP/Boiler/Gas Upgrader/Flare Stack inlet and also includes all the equipment required to both process and handle the gas, but also deliver it to its ...
-
Manufactured by Bryan Boilers Div. - Bryan Steam LLCbased in USA
A wide selection of bryan boilers are available as knockdown™ models which are shipped in sections, partially disassembled to pass through standard door sized openings for assembly at the final location. this eliminates the need for extra work removing walls or enlarging door openings and the final assembly does not require expensive certified ...
-
Manufactured by Industrial Boiler & Mechanicalbased in USA
As a result of the EPA’s Clean Air Act, many state and federal environmental regulations require increasingly stringent lower NOx emissions compliance for manufacturing facilities, chemical plants, refineries, and industrial plants dependent on production processes that produce NOx, CO and other VOCs. These facilities are faced with meeting or exceeding low NOx (30 ppm) and even ultralow ...
-
Manufactured by Trecan Combustion Limitedbased in CANADA
The Trecan 20-SG is commonly used in hospital, university and commercial parking garages and other parking structures that have parking on the top deck and/or have multiple top deck parking facilities. With a capacity of 20 tons per hour, its 4.5 million BTU/hr burner can melt 50 to 100 cubic yards of snow with an average snow density of 15 to 30 lbs/cu. ft. per hour. ...
-
Manufactured by Flare and Vapor Systems Corpbased in USA
FAV Systems. has developed the FAV-WG-TDU. This unit is a vertically fired, no visible flame, ceramic lined combustion chamber with a multi-tipped burner arrangement. This unique burner design and configuration produces an efficient and very quiet burning combustion flame. We can achieve these features by utilizing a ceramic coated burner, velocity breaker and combustion zone stabilizer combined ...
-
Manufactured by Pyradiabased in CANADA
By adding heat recovery system to your thermal oxidizer you can recover up to 70% of the combustion heat. This represents significant energy savings. The system allows your to re-use the heat generated from the previous airstream in order to reduce the energy needed. With one of PYRADIA's heat recovery systems you can easily turn your pollutants into free energy and save ...
-
Distributed by Environmental Controls & Methods, Inc. (ECMI)based in USA
Once in a great while, a patented technology is developed that has a universal need, and has the ability to make a substantial impact on Industry and Facility Management alike. A product which has the potential to offer a significant global value in reducing energy consumption, and can make a serious contribution to an organization's bottom ...
-
Manufactured by Jammbco Industrial Solutions Ltdbased in CANADA
Kiln Feed Spirals. Kiln Feed Shrouds. Thermal Sighting Tubes. Kiln Bed Dams. Thimble Castings. Nose Ring Castings. Burner Fittings. Grate Plates and Bars. Grill Plates. Centrifugal Cast ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301 Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air ...
-
Manufactured by Talbotts Biomass Energy Limitedbased in UNITED KINGDOM
Part of the Talbott T Range, the Talbott T75, 25kW output able to heat areas up to 3,000 sq.ft whilst using approx. 8kg/hr of wood off ...
-
Manufactured by Detroit Stoker Companybased in USA
Efficiency and Versatility for Boiler Burner Applications: Enhance performance of existing solid fuel grate-fired combustion systems. Includes Startup & Auxiliary function. Gain fuel switching flexibility. Increase efficiency. Improve load swing response. Lower operating costs. Recover boiler derate. Resolve emissions problems. ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec 244W Series is a highly reliable flare and ignition system. It utilizes a patented pilot ignition system that mixes pilot gas and air at ground level to provide a robust, high temperature pilot. The pilot is ignited away from the flare stack. This reduces wear and tear and allows routine maintenance to be carried out without exposing the operator to high temperatures. The design of the ...
-
Manufactured by ASHCORbased in USA
The ASHCOR High Pressure (HP) Flare System is constructed to use as a single high-pressure flow and is designed to meet the industry standard of flaring while protecting your site. ASHCOR HP flares can be scaled to fit individual site needs from 1.5 to 10 million scf/day. Each HP flare comes equipped with standard safety products including ASHCOR flame arresters and Flame Smart burner management ...
-
Manufactured by S.B Environmental Co, Ltd.based in CHINA
Our incinerators use easy to use and start-up and excellent performance ratio burners.The latest technology and high quality from Italy CE certified burners used in our incinerators which cause high effective and high burn ...
-
Manufactured by Hunan Benji Environmental Energy Technology Co.,LTDbased in CHINA
Our pyrolysis plant has auto feeding system. The material goes from underground to the feeder and then goes into reactor,which is automatic operation.And no flying dust in workshop at ...
-
Manufactured by Hofstetter BVbased in NETHERLANDS
The HOFGAS-CFM4c high temperature flare provides safe and environmentally-friendly combustion of coal mine gas. The exhaust gas emissions meet the stringent requirements with destruction efficiency > 99.95% in relation to methane gas. This is achieved with combustion temperatures between 1’000 - 1’200°C and a defined residence time of > ...
-
Manufactured by Kalfrisa, S.A.based in SPAIN
The SO series solid waste pyrolytic incinerator, thanks to its minimal installation and maintenance requirements and its ease of handling, enables high performance at low ...
-
Manufactured by REMKO GmbH & Co. KGbased in GERMANY
The REMKO series is characterised by their compact dimensions, flexible application possibilities, and particularly by their microprocessor controlled gas burner technology. A total of four unit sizes with a heating capacity from 4.7 to 82.0 kW is available. The units are suitable for both wall and ceiling mounting. A variety of exhaust gas and fresh air versions rounds out the flexible ...
-
Manufactured by Fireye Inc.based in USA
The Surefire II High-Energy Ignition System is used for direct spark ignition of most gas or liquid fuels used in oil or gas igniters or main burners. The High-Energy Ignition System is available in various versions. To ensure optimal operation, the first part of the ignition tip should always be in an ignitable fuel-air mixture, during all modes of ...
-
Manufactured by Space-Raybased in USA
The PGR series heater offers maximum flexibility in hospitality and golf range applications. This range of heaters can provide warmth in the windiest conditions and will blend into the surroundings. The decorative grill provides an aesthetically appealing look that will please any building ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you