Energy Management Equipment
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The gravel filter enables the coarse filtration of the biogas by passing through a gravel layer. Foreign particles, foam and condensate are removed and channelled to a drainage point. The filter can be easily accessed through a screwed cover for cleaning. Contamination can be easily removed without the need for opening the cover by rinsing with water. The gravel filter is available for various ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
PPE kits save lives and ensure the safety of your workers. Anyone else working in close proximity to dangerous materials or powerful incinerators should also use them. The majority of personal protective equipment should be common sense and common place. Your exact requirements may vary depending on the types of waste you handle. But there are some essential pieces of PPE that every waste handler ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The CCC Catalyst Monitor by Continental Controls Corporation is a centralized control system that allows for multiple inputs (O2 Sensor, NOx Sensor, Cat dP, Cat Temperature), and outputs enabling optimal performance when combined with CCC ECV5 air-fuel ratio control valve and an NSCR or Oxidation catalysts. Acting as a central communication hub, it integrates inputs and outputs for various ...
-
PremiumManufactured by Texas Boom Company LLCbased in USA
This is the best diesel fuel trailer on the market. Period. Offering 1000 gallon storage and transport of class 3 combustible materials. Made to Department of Transportation (DOT) standards. With all the features highlighted below, the DOT 990 is the right choice for your fuel hauling ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The low-price solution for the price-conscious farmer! Robust and compact manual gas flare for burning off biogas at agricultural biogas plants. Perfect for smaller new plants and for retro fitting to existing biogas plants. The operation of the eco gas are with a fermenter pressure of 3 mbar is possible although a minimum operating pressure of 10 mbar is always recommended. The eco gas flare ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...
-
PremiumManufactured by Energy Systems & Design (ES&D)based in CANADA
New! Injection Molded housing with drip lip! In the 1970’s Paul Cunningham, owner and operator of Energy Systems & Design, had a need to power his off-grid house. He set off on a mission to create an efficient and reliable micro hydro machine. Utilizing a car alternator type micro hydro machine and the wheels he cast himself, he created the first machine. Through many hard-working ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Efficient & Productive: Heavy steel shell with 1600°C refractory and high-efficiency calcium silicate insulation. Full-size interlocked load/ash door. High-grade refractory lined chimney provides years of maintenance-free operation. Pressured combustion air penetrates the waste and causes turbulence in the gas stream to ensure efficient destruction of emissions. Available on a mobile ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The Continental Controls Corporation’s VI200 is a versatile, microprocessor-based air-fuel ratio controller that can be used in a variety of combustion systems. It is designed to provide precise and accurate control of the air-fuel ratio, which can help improve fuel efficiency, reduce emissions, and extend equipment life. The VI200 is compatible with a wide range of sensors and actuators, ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Special Solutions for Preadmission Applications. The direct-drive GM ... dz blowers from AERZEN are high-performance machines. 1 or 2 stage design, with separate pressurised oil lubrication for the oil-free transport and compression of air, neutral gases, and gas mixtures. Highly advanced and extremely robust Roots-type products. Available in a wide range of special materials and seals, such as ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The high quality of the materials combined with cutting-edge technology of the compressor unit, ensure reliability, professionalism and economy and allows continuous use, unthinkable in traditional direct-drive oil-free compressors. The AirGen OFCAS RACK is the ideal compressor to supply all Zero Air generators ZA FID and ZA Total or the high purity Nitrogen generator NG ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS AS 4 Series is a complete stainless steel quadruple tube heat exchanger designed for applications with viscous fluids. The product flows through the annular space and the service fluid flows through the service tubes to ensure even heating or cooling. The removable inner tube allows for easy inspection of annular space. Using HRS’ corrugation technology, heat transfer and efficiency ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The EG353 series meets the demanding multiple output requirements of SEM, and applications including inspection, material and biological sciences, and ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The C61 gas compressor has the latest state-of-the-art technology combined with the experience and reliability that comes with building and installing over 5000 compressors. This compressor is designed in compliance with API 617, a requirement for the severe environments and operating conditions this equipment may ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s UltraVolt High Power C series of regulated DC-to-DC supplies is optimal for laser, cap-charging, pulsed power, pulse generator, and test equipment ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan™ 250 is our most powerful package and is based on proven technologies from other Solar Turbines models. It produces 50 percent more power in the same footprint as the Titan 130, while providing 40 percent shaft efficiency with emissions reduced by up to 30 ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Low-Frequency Series with Enhanced Arc Control and Internal Load Matching for 40 kHz Reactive Sputtering Applications. The PEII series of power supplies are the trusted standard for dual-magnetron sputtering, as an effective vacuum cleaning tool, and in multiple PECVD ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan 130 continues Solar Turbines' legacy of highly reliable and durable gas turbine engines with low maintenance requirements. Like our other turbines used for power generation, the Titan 130 is also available for compressor and mechanical-drive ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you